IPTellogo-byline-2020-dark-v2-pnd-optimised-500 (1)
  • There are no suggestions because the search field is empty.

Wi-Fi Survey Types: Predictive vs Pre- and Post-Deployment

Nov 17, 2026

Ask three Wi-Fi companies for a "site survey" and you can get three very different things: a heatmap drawn from your floor plans, an engineer on a ladder with a test access point, or a walk-through after the install. They're all surveys. They answer different questions. In this blog, we'll compare predictive, pre-deployment and post-deployment Wi-Fi surveys, explain when each one is worth paying for, and show how we combine them so you get a network that works the first time.

Engineer checking Wi-Fi coverage on a laptop under a ceiling access point — Wi-Fi Survey Types: Predictive vs Pre- and Post-Deployment


Survey Types: What Is the Difference Between Predictive, Pre- and Post-Deployment?

Wi-Fi Predictive Design: Wi-Fi (wifi) HeatmapA predictive survey designs the network remotely from floor plans. A pre-deployment survey tests that design onsite, with a real access point, before any cabling. A post-deployment survey tunes and measures the installed network to prove it delivers what was designed. Each one answers a different question, at a different stage of the project.

Think of it as plan, test, prove.

At IPTel, all three are done in Ekahau by our own Ekahau-certified engineers. We design in Ekahau AI Pro and measure onsite with Ekahau Sidekick 2 across 2.4, 5 and 6 GHz, so the model, the test and the proof all line up in the same tool. You can see how our Ekahau-based Wi-Fi site surveys work on our survey page.


Predictive Surveys: When Is a Remote Design Enough?

A predictive survey is worth it whenever you need an access point count, locations and a budget before anyone visits site. It's quick, because it's done remotely from floor plans. It suits early budgeting, tenders, new buildings that don't exist yet and design reviews. On its own, though, it's a model, not a guarantee.

Here's how ours run. We agree the Wi-Fi grade (data, voice or location tracking) and the access point model first, then scale your plans, model every wall and heavy room, place the access points and simulate coverage on each band. A second engineer peer reviews the design before you see it. You receive an access point count, a report with heatmaps and a markup drawing showing every access point.

Turnaround depends on the size of the site and the quality of the plans. CAD (DWG) files speed things up noticeably, because the walls can be imported rather than drawn by hand. We confirm the delivery date in the quote. If you just want a rough number first, our free Wi-Fi access point estimator will give you a ballpark in a couple of minutes.

The catch? A predictive is only as good as its assumptions. Plans say "plasterboard"; the wall turns out to be brick behind a plasterboard skin. That's why our predictive drawings are marked "Not for Construction" until the design has been tested onsite.

Pro-Tip: Send the most recent plans you have, and tell us about anything that isn't on them: compactus, lead-lined rooms, cool rooms, metallic tinted glass. Those are the rooms that break a predictive.


Pre-Deployment Surveys: When Is Testing Onsite Worth It?

Pre-Deployment Wireless Survey – What to ExpectA pre-deployment survey is worth it on almost every new installation, because it's the last cheap moment to change the design. Engineers mount the exact access point model on a battery-powered pole at the planned locations, measure what it really covers, and correct the design before a single cable is run.

It's often called an "AP on a stick" survey. We test around 30% of the planned locations, always including the risky ones: corners, odd walls, stairwells, lifts and heavy rooms. We survey both sides of the walls so the wall values in the model can be calibrated against real measurements.

The visit does more than measure signal. We record ceiling types, mounting heights, cable paths, obstructions like light fittings and ducts, and any existing access points. Then we update the predictive to match reality, and the drawing becomes "Ready for Construction".

Is it ever optional? On a highly repeatable site, such as a chain of near-identical stores, the onsite sample can be smaller. In warehouses, hospitals, heritage buildings and anywhere the construction is unknown, we treat it as essential. Moving an access point on a drawing costs minutes. Adding one after the cabler has left costs far more.


Post-Deployment Surveys: Why Validate After the Install?

A post-deployment survey is worth it whenever you need proof that the installed network delivers what was designed, which is most of the time. It has two parts: RF tuning, to make sure power and channels are set properly, then a validation survey of 100% of the areas in scope, delivered as a report and an as-built drawing.

The order matters. A network with every access point turned up too high can look "all green" on a heatmap and still drop calls, because the cells are too big and devices hang on to distant access points. So we survey a small area first, check cell sizes on each band, adjust the RF profiles with a senior engineer, let the controller settle, and re-survey the same area. Only once the tuning is right do we walk the whole site.

The validation then compares what was built against the design and explains any differences. For voice, location tracking and clinical networks, this is the evidence that the grade you paid for was delivered. It's also a baseline for the day someone says the Wi-Fi is "worse than it used to be".


Choosing Surveys: Which Combination Does Your Project Need?

How to Choose Wi-Fi Surveys for Large SitesMost new installations and refreshes need all three surveys: predictive to plan, pre-deployment to test, post-deployment to tune and prove. A predictive on its own suits early budgets and tenders. A network that already exists and is misbehaving needs a diagnostic survey instead, not a fresh design.

A few common situations make it clearer. Budgeting a refresh for next financial year? Start with a predictive. New building, warehouse fit-out or hospital wing? All three, in that order. A like-for-like access point swap on a site that has always worked well? We'll still model it, because newer access points behave differently, then size the onsite test to the risk.

Need both onsite surveys? On a new installation they're two visits, because the network goes in between, so quote them together and we'll plan both around your install dates.


Wi-Fi Survey Types: FAQs

What Is the Difference Between a Predictive and a Pre-Deployment Wi-Fi Survey?

A predictive Wi-Fi survey is a design built remotely from floor plans in software such as Ekahau. A pre-deployment survey takes that design onsite and tests it with a real access point at the planned locations, then corrects the model. The predictive tells you what should work; the pre-deployment survey confirms it before cabling.

Can Pre- and Post-Deployment Wi-Fi Surveys Be Done in One Site Visit?

Not on a new installation, because the access points are installed between the two surveys. IPTel makes each visit count: the pre-deployment visit records existing access points, ceilings, mounting heights and cable paths, and the post-deployment visit tunes and validates the network in the same trip.

How Quickly Can I Get a Predictive Wi-Fi Survey?

Predictive surveys are done remotely from your floor plans, so there's no site visit to schedule and work starts as soon as we have the plans. Timing depends on site size and plan quality; CAD files speed it up. IPTel confirms the delivery date in the quote.

Do You Use Ekahau for Wi-Fi Site Surveys?

Yes. IPTel is an Ekahau partner, and our Ekahau-certified engineers in Brisbane, Sydney and Melbourne design in Ekahau AI Pro and measure with Ekahau Sidekick 2 across 2.4, 5 and 6 GHz. Every survey is delivered with heatmaps and a markup drawing showing each access point.

What if My Existing Wi-Fi Is Already Causing Problems?

Then you need a diagnostic survey rather than a new predictive. It measures the network as it is, including signal, interference, channel overlap and roaming, and finds the cause before anything is changed.


Wi-Fi Survey Types: Summary

Predictive, pre-deployment and post-deployment surveys aren't competing options; they're three steps in one job. The predictive plans the network quickly and cheaply, the pre-deployment survey catches the building's surprises before cabling, and the post-deployment survey tunes the result and proves it works. Skip a step and you're betting the budget on an untested assumption.

Need Help With Wi-Fi Surveys?

Get a ballpark with our free Wi-Fi access point estimator, check your current network with the free Wi-Fi Health Check, or see our Ekahau-based Wi-Fi surveys in Brisbane, Sydney and Melbourne. When you're ready for a quote, get in touch with the IPTel team at sales@iptel.com.au.

Free tool

How Many Wi-Fi Access Points Do You Need?

Work out APs, PoE and switch ports floor by floor, using the same survey grades our Cisco wireless engineers design to. Takes under a minute.

Try the AP Estimator →