This blog will kick off the introduction to what Industrial IoT is - and which industries might be able to benefit. IoT is not just about small little Wi-Fi connected devices, but a wealth of industrial, ruggedized devices, designed to be used in an industrial setting.

In late 2020 Cisco acquired a California start-up called ThousandEyes, a software-as-a-services (SaaS) platform used by some of the biggest hitters in the IT world: Microsoft, Amazon, Salesforce and IBM to name a few. If you're wondering what all the fuss is about - this explainer blog will get you all the inside information!

TBA

Cisco RX-SOP is a feature that de-tunes the receive sensitivity of an Wi-Fi Access Points. Essentially what feature is doing is to tell the AP to ignore transmissions it hears below a certain threshold - it's not removing the traffic from the air, but allowing the AP to ignore it and be able to talk over the top of background noise.

There’s many firewalls out there to pick from – and they tend to be expensive and complex to configure. Meraki has managed to make a security appliance that both offers simplicity of management and is highly secure – in this blog, we’ll take a look at the Meraki MX appliance.

The Cisco 9800 WLC comes in a range of options, from the high throughout 9800-80 down to the cloud based virtual WLCs. The controller has a number of built in features that help increase the uptime of the controller – something you’d expect with a high-end wireless controller from Cisco.

Many patients are infected with various diseases during their stay in hospital. The most obvious way to reduce cross-infection is with hand washing. Hospitals have a requirement to reduce the transmission rates of infection from patient to patient, but staff are always busy, going in and out of rooms, sometimes only very briefly. Technology can help in[…]

Managing both your wired and wireless networks is a key requirement for every network administrator. If you need to make the case for why you should invest in the Cisco Catalyst Center platform, in this blog we will explore the top 6 reasons to deploy Cisco Catalyst Center to manage your network.

Conducting a proof of concept is one of the key ways you can use to test out technology and solutions and see if they are a good fit for your business. How does the POC process work though? Let’s take a look in this blog.

Sign up for your free Meraki Demo - delivered direct Meraki, so you can connect and hear from the manufacturer themselves.